[General]

## Specify a log file here to enable logging

# Log file = /tmp/vompserver.log

## If you have more than one vompserver running you
## can enter a name here that will appear on the
## server select list on the MVP

# Server name = My-Server

## Server TCP port. Default: 3024
## Will be transmitted to clients in UDP discovery protocol

# TCP port = 3024

## UDP discovery protocol port number
## Defaults to 51051
## For IPv4 this must be between 51051 and 51055,
## clients will broadcast to all 5 ports
## This allows multiple VDRs on the same IP address
## For IPv6 the port is 51056 and cannot be changed

# UDP port = 51051

## Enable this to start the built in Bootp server
## Required to boot the MVP if you have not got a
## DHCP server that can tell the MVP its boot file
## name and server

# Bootp server enabled = yes

## Enable this to start the built in TFTP server
## Required to boot the MVP if you have not got a
## TFTP server running elsewhere

# TFTP server enabled = yes

## Base directory for TFTP server
## If you leave this blank the plugin config
## path will be used - i.e. where this file is

# TFTP directory = /tftpboot

## Change the following to "no" to disable the
## built in mvprelay server

# MVPRelay enabled = yes

# Change the following to the directory, where the channel logos reside,
# all png and the channel name in lower case
# if not set a logo directory below the plugin directory is used

# Channel logo directory = /logodir

# Change the following to the directory, where the EPG image reside,
# if not set a image directory is try to be set automatically

# Epg image directory = /EpgImage